BESCHRIJVING
SD02H0SB is a low-profile 2-position DIP switch featuring a sealed flush actuator with surface mount terminals and peelable top tape seal. The switch is designed for process-sealed operation, withstanding soldering and cleaning processes, and is RoHS compliant. It offers a contact carry rating of 100 mA at 50 V DC maximum, with switching capability from 0.1 mA at 5 V DC minimum to 100 mA at 25 V DC maximum, and maintains contact resistance below 50 milliohms typical at 2–4 V DC with 100 mA load. The device is rated for 2,000 make-and-break cycles at full load per circuit, with an insulation resistance of 10? ohms minimum and dielectric strength of 500 V RMS minimum between adjacent terminals. Operating and storage temperatures range from -40°C to +85°C, with an operating force of 100–700 g initial. This switch is ideal for address switching in industrial controls, logic switching for computers and peripherals, and function control in numerous applications where space-saving and reliability are critical.
Zoekwoorden: SD02H0SB
SPECIFICATIES
VEELGESTELDE VRAGEN
Is SD02H0SB RoHS-conform?
Ja, SD02H0SB is RoHS-conform.
Wat is de levertijd voor SD02H0SB?
De standaard levertijd voor SD02H0SB is ongeveer 12 weken. Voorraadhoeveelheden worden verzonden vanuit Master Electronics.
OP VOORRAAD: 1.879
Kan direct verzenden
Minimale bestelhoeveelheid: 10
Fabriekslevertijd 12 Weken
English
中文 / 汉语
Deutsch
Español
Nederlands
