Inloggen
NL
English
中文 / 汉语
Deutsch
Español
Nederlands
BESCHRIJVING
173706-1 is a loose-piece pin contact for the Econoseal J Series sealed connector system, engineered for automotive applications requiring waterproof protection and rugged construction. The contact accommodates wire sizes from 0.50 to 1.25 mm² (AWG 20–16) with an insulation diameter range of 2.0–2.6 mm (0.079–0.102 inch), and features brass material with pre-tin plating for reliable electrical performance and corrosion resistance. This contact is designed to mate with socket contacts in the Econoseal J Series and is supplied as a loose-piece component with a package quantity of 1,000 units. The product is commonly used in sensor wiring within motor hoods and electrical control systems operating under extreme environmental conditions including moisture, dust, and corrosive gases, where sealed connector protection is essential to prevent premature contact degradation.
Productkenmerken:
- Contact
- Wire Range = 0.50-1.40² [20-16] mm [AWG]
- Contact Type = Tab
- Wire Insulation Diameter = 2.00 - 2.59 mm
- Brass Contact Material
Zoekwoorden: 1737061
SPECIFICATIES
VEELGESTELDE VRAGEN
Is 173706-1 RoHS-conform?
Ja, 173706-1 is RoHS-conform.
Wat is de levertijd voor 173706-1?
De standaard levertijd voor 173706-1 is ongeveer 18 dagen. Voorraadhoeveelheden worden verzonden vanuit Master Electronics.
OP VOORRAAD: 0
MOQ voor niet-voorraadhoeveelheid: 50000
Meerdere: 1000
Fabriekslevertijd 18 Weken
3D PDF
Product Drawing - .070 TAB CONTACT, LP
Gegevensblad
Product Specification - Crimping of AMP-ECONOSEAL ''J''-II, .070 and .250 Series Contact
Instruction Sheet - ECONOSEAL J MARK II+ CONNECTOR (EJ-MK II+)
