Inloggen
NL
English
中文 / 汉语
Deutsch
Español
Nederlands
5787082-5
D Sub Connector - 50 Contacts - Receptacle - Through Hole - Amplimite 0.050 III Series - Steel Body. ...
BESCHRIJVING
The 5787082-5 Amplimite 0.050 III series IDC D-sub Connectors offers a high-density D type interface and a solder-less board-mount interconnection. Choice of configurations includes headers with rails and latch blocks, with latch blocks only and without rails and latch blocks. It headers with ACTION PIN contacts are compatible with SCSI-2, SCSI-3, EIA RS-232, IPI-2 and HIPPI standards. The diameter of the hole is smaller than the diagonal size of the pin. The beam characteristics of the pin are designed so that a plastic, as well as elastic, deformation takes place during insertion. The two spring members compress to different degrees to accommodate hole tolerances. The compliant pin also reduces strain on the board. With a rigid pin, the elastic strain energy is stored entirely in the board, leading to damage of the plated through holes. The residual force of the elastic deformation maintains stored energy to produce a gas-tight contact zone between the pin and the plated-through-hole.
Productkenmerken:
- Connector
- Connector Type = Receptacle
- Number of Positions = 50
- PCB Mount Angle = Right Angle
- Through Hole Contact Termination Type
Zoekwoorden: 57870825
SPECIFICATIES
VEELGESTELDE VRAGEN
Is 5787082-5 RoHS-conform?
Ja, 5787082-5 is RoHS-conform.
Wat is de levertijd voor 5787082-5?
De standaard levertijd voor 5787082-5 is ongeveer 15 dagen. Voorraadhoeveelheden worden verzonden vanuit Master Electronics.
OP VOORRAAD: 1.058
Kan direct verzenden
Minimale bestelhoeveelheid: 10
Meerdere: 10
Fabriekslevertijd 15 Weken
Prijs (USD)
3D PDF
Productgidsen
Gegevensblad
Product Specification - .050 Series Shielded AMPLIMITE Connector
