1-5103310-0
Wire-To-Board Connector - 2.54 mm - 50 Contacts - Header - AMP-LATCH Series - Through Hole - 2 Rows. ...
BESCHRIJVING
Reduce safety concerns with this shrouded 1-5103310-0 header connector from TE Connectivity which will reduce the possibility of accidentally shorting pins when a printed circuit board is being used. This HDR connector's 50 contacts that are made out of brass and plated with gold over palladium nickel over nickel|gold over nickel. This is a 2-row connector. It has a right angle body orientation. Its pitch is 2.54 mm. It has a header type gender. This device has a maximum current rating of 1 A/contact. In order to ensure parts aren't damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. This connector has an operating temperature of -65 to 105 °C. This product is 71.12 mm long, 9.14 mm tall and 12.31 mm deep. 1-5103310-0 is housed in black polybutylene terephthalate|nylon. It uses the solder termination method.
Productkenmerken:
- Preloaded
- Connector Style = Header - Pin
- Header Type = Pin Header
- AMP-LATCH Product Line
- Low Profile
Zoekwoorden: 151033100
SPECIFICATIES
VEELGESTELDE VRAGEN
Welk product vervangt 1-5103310-0?
Het aanbevolen vervangende product voor 1-5103310-0 is 5-1634689-0 van TE Connectivity / AMP Brand, verkrijgbaar bij Master Electronics.
Is 1-5103310-0 RoHS-conform?
Ja, 1-5103310-0 is RoHS-conform.
Wat is de levertijd voor 1-5103310-0?
De standaard levertijd voor 1-5103310-0 is ongeveer 8 dagen. Voorraadhoeveelheden worden verzonden vanuit Master Electronics.
OP VOORRAAD: 1.618
Kan direct verzenden
Minimale bestelhoeveelheid: 35
Meerdere: 35
Fabriekslevertijd 8 Weken
English
中文 / 汉语
Deutsch
Español
Nederlands
