help desk software
BOB-16842 by sparkfun electronics
Afbeelding is ter illustratie - zie fabrikantspecificaties
SparkFun Electronics Geautoriseerde distributeur

BOB-16842

Qwiic Button - Green LED ...

RoHS-conform
Verpakking
Accessoires
Offerte voor programmering aanvragen
Conformiteitscertificaat

BESCHRIJVING

Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an easy to use I2C device! Utilizing our Qwiic Connect System, using the button is as simple as connecting a cable and loading up some pre-written code! If you need multiple buttons for your project, fear not! Each button has a configurable I2C address, so you can daisy-chain multiple buttons over Qwiic and still address each one individually. We\'ve got an example in our [Arduino library](https://github.com/sparkfun/SparkFun_Qwiic_Button_Arduino_Library) that provides a super-easy way to configure your Qwiic Button to whatever I2C address you desire. You can download the library through the Arduino library manager by searching \'SparkFun Qwiic Button\' or you can get the GitHub repo as a .zip file and install the library from there. In addition to handling blinking and debouncing, the Qwiic Button has configurable interrupts that can be configured to activate upon a button press or click. We\'ve also taken the liberty of implementing a [FIFO queue](https://en.wikipedia.org/wiki/Queue_(abstract_data_type)) onboard the Qwiic Button where it keeps an internal record of when the button was pressed. This means that code on your microcontroller need not waste valuable processing time checking the status of the button but instead can run a small function whenever the button is pressed or clicked! For more information on interrupts check out [our guide here](https://learn.sparkfun.com/tutorials/processor-interrupts-with-arduino/all)! *** *The SparkFun [Qwiic](https://www.sparkfun.com/qwiic) Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.* *** ->

Zoekwoorden: BOB16842

SPECIFICATIES

Productkenmerk
Attribuutwaarde
Selecteer kenmerk
Producten gevonden: 0
Leverancier:
SparkFun Electronics
Onderdeelnr.:
BOB-16842
Meeteenheid:
Per Each
RoHS:
Yes
HTS:
9027102000
COO:
US
ECCN:
EAR99
Standaardverpakking leverancier: Deze informatie wordt verstrekt voor klanten die de voorkeur geven aan het kopen in veelvouden van de standaardverpakkingshoeveelheid van de fabrikant. Minimale bestelhoeveelheden en vereiste bestelveelvouden worden weergegeven bij onze prijs- en beschikbaarheidsinformatie.
1

VEELGESTELDE VRAGEN

Is BOB-16842 RoHS-conform?

Ja, BOB-16842 is RoHS-conform.

Wat is de levertijd voor BOB-16842?

De standaard levertijd voor BOB-16842 is ongeveer 2 dagen. Voorraadhoeveelheden worden verzonden vanuit Master Electronics.

OP VOORRAAD: 0

Fabrieksvoorraad: 4   kan verzenden 9-7-26

Minimale bestelhoeveelheid: 5

Fabriekslevertijd 2 Weken kan verzenden 9-8-26  

Prijs (USD)

Aantal
Prijs per eenheid
1
$9.306
5
$8.460
25
$6.880
50
$6.860
100
$6.570
250
$6.030
500
$6.010
1.000
$5.870
2.500 +
$5.640