Inloggen
NL
English
中文 / 汉语
Deutsch
Español
Nederlands
VW3S8201R15
cable for pulse/direction signal, Lexium SD3, 5V, shielded, 1.5m ...
BESCHRIJVING
This product is part of the Lexium SD3 range, an offer of 3phase stepper drives and stepper motors. This is a pre-assembled encoder cable for stepper motor. This shielded cable is an accessory to SD326 stepper motor drives. It is equipped with a 24 way Molex connector on the drive side and one stripped end. It transmits the digital signaling types used in position control. Its length is 0.2m. It is used between stepper drive SD326 and external impulsion generator. This product is certified by CE, CUL, and UL. It meets EN/IEC 50178, EN/IEC 61800-5-1, EN/IEC 61800-3 environment 1/2, and EN/IEC 61800-3 standards. It is compatible with BRS3 stepper motors and SD326 stepper motor drives. The SD3 is an universally applicable stepper motor drive. Stepper drives and stepper motors are for motion control with high accuracy and high torque at low rotation speeds.
Zoekwoorden: VW3S8201R15
SPECIFICATIES
VEELGESTELDE VRAGEN
Is VW3S8201R15 RoHS-conform?
Ja, VW3S8201R15 is RoHS-conform.
Wat is de levertijd voor VW3S8201R15?
De standaard levertijd voor VW3S8201R15 is ongeveer 2 weken. Voorraadhoeveelheden worden verzonden vanuit Master Electronics.
OP VOORRAAD: 0
Fabriekslevertijd 2 Weken
Gegevensblad