Alternatieve verpakking
23LC1024-I/ST by microchip technology
Afbeelding is ter illustratie - zie fabrikantspecificaties
Microchip Technology Geautoriseerde distributeur

23LC1024-I/ST

SRAM Chip Sync Dual - 3.3V/5V - 1M-bit - 128K x 8 - 25ns - TSSOP - 8-Pin. ...

Bekijk gegevensblad Stel een vraag aan het gegevensblad
RoHS-conform
TUBE Verpakking
Accessoires
Offerte voor programmering aanvragen
Conformiteitscertificaat

BESCHRIJVING

The 23LC1024-I/ST is a 1Mb SPI Serial SRAM with SDI and SQI interface. The memory is accessed via a simple serial peripheral interface (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a chip select (CS) input. Additionally, SDI (serial dual interface) and SQI (serial quad interface) is supported if application needs faster data rates. This device also supports unlimited reads and writes to the memory array. It may also interface with microcontrollers that do not have a built-in SPI port by using discrete I/O lines programmed properly in firmware to match the SPI protocol.

Zoekwoorden: 23LC1024IST

SPECIFICATIES

Productkenmerk
Attribuutwaarde
Selecteer kenmerk
Producten gevonden: 0
Leverancier:
Microchip Technology
Onderdeelnr.:
23LC1024-I/ST
Meeteenheid:
Per Each
RoHS:
Yes
HTS:
8542320041
COO:
TH
ECCN:
EAR99
Standaardverpakking van de leverancier: Het aantal artikelen, de lengte, het gewicht of het volume in de originele verpakking van de leverancier voor efficiënte opslag, verwerking en distributie.
100
Verpakkingstype:
TUBE
Data Rate Architecture:
SDR
Dimension:
3 x 4.4 x 1 mm
Density in Bits:
1048576 bit
Family:
23LC1024
Address Bus Width:
24 bit
Density:
1 Mbit

VEELGESTELDE VRAGEN

Is 23LC1024-I/ST RoHS-conform?

Ja, 23LC1024-I/ST is RoHS-conform.

Wat is de levertijd voor 23LC1024-I/ST?

De standaard levertijd voor 23LC1024-I/ST is ongeveer 12 weken. Voorraadhoeveelheden worden verzonden vanuit Master Electronics.

  Verschillende verpakkingsopties beschikbaar.  Bekijk alternatieven

OP VOORRAAD: 879

Kan direct verzenden

Minimale bestelhoeveelheid: 100

Meerdere: 100

Fabriekslevertijd 12 Weken

Prijs (USD)

Aantal
Prijs per eenheid
100
$2.52
300
$2.50
500
$2.49
1.000
$2.48
2.500
$2.47
5.000
$2.46
7.500
$2.45
10.000 +
$2.44

Tools/3D-modellen

Productgidsen

Productwijzigingen