help desk software
Alternatieve verpakking
23LC1024-I/SN by microchip technology
Afbeelding is ter illustratie - zie fabrikantspecificaties
Microchip Technology Geautoriseerde distributeur

23LC1024-I/SN

SRAM Chip Sync - Dual - 3.3V/5V - 1M-bit - 128K x 8 - SOIC - 25ns - 8-Pin. ...

Bekijk gegevensblad
RoHS-conform
TUBE Verpakking
Accessoires
Offerte voor programmering aanvragen
Conformiteitscertificaat

BESCHRIJVING

The 23LC1024-I/SN is a 1MB serial SRAM Device. The memory is accessed via a simple serial peripheral interface (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a chip select (CS) input. Additionally, SDI (serial dual interface) and SQI (serial quad interface) is supported if application needs faster data rates. This device also supports unlimited reads and writes to the memory array.

Zoekwoorden: 23LC1024ISN

SPECIFICATIES

Productkenmerk
Attribuutwaarde
Selecteer kenmerk
Producten gevonden: 0
Leverancier:
Microchip Technology
Onderdeelnr.:
23LC1024-I/SN
Meeteenheid:
Per Each
RoHS:
Yes
HTS:
8542320041
COO:
TH
ECCN:
EAR99
Standaardverpakking leverancier: Deze informatie wordt verstrekt voor klanten die de voorkeur geven aan het kopen in veelvouden van de standaardverpakkingshoeveelheid van de fabrikant. Minimale bestelhoeveelheden en vereiste bestelveelvouden worden weergegeven bij onze prijs- en beschikbaarheidsinformatie.
100
Verpakkingstype:
TUBE
Family:
23LC1024
Data Rate Architecture:
SDR
Architecture:
N/A
Dimension:
4.9 x 3.9 x 1.25(Min) mm
Density:
1 Mbit
Address Bus Width:
24 bit
Density in Bits:
1048576 bit

VEELGESTELDE VRAGEN

Is 23LC1024-I/SN RoHS-conform?

Ja, 23LC1024-I/SN is RoHS-conform.

Wat is de levertijd voor 23LC1024-I/SN?

De standaard levertijd voor 23LC1024-I/SN is ongeveer 14 dagen. Voorraadhoeveelheden worden verzonden vanuit Master Electronics.

  Verschillende verpakkingsopties beschikbaar.  Bekijk alternatieven

OP VOORRAAD: 2.151

Verzending today, als u bestelt in

Minimale bestelhoeveelheid: 100

Meerdere: 100

Fabriekslevertijd 14 Weken

Prijs (USD)

Aantal
Prijs per eenheid
100
$2.47
300
$2.42
500
$2.41
1.000
$2.40
2.500
$2.39
5.000
$2.38
7.500
$2.37
10.000 +
$2.36

Tools/3D-modellen

Productgidsen

Productwijzigingen