7103P4DAV2BE
Miniature Toggle Switch - SP (On-Off-On) - 0.4VA@20V - .250" Flatted Anti-rotation Actuator - Vertical 90° PCB Pin - 1/4-40 Bushing - Epoxy Seal ...
BESCHRIJVING
The 7103P4DAV2BE is a miniature toggle switch from the C&K 7000 Series designed for compact switching applications requiring vertical right-angle PC thru-hole termination with 0.150" pitch spacing. This SPDT (Single Pole Double Throw) switch features an epoxy seal for environmental protection and is rated for 0.4 VA maximum at 20 V AC or DC with B contact material, or up to 5 amps at 120 V AC or 28 V DC with Q contact material. The switch offers contact resistance below 10 mO typical at 2-4 V DC with 100 mA, insulation resistance of 10? O minimum, and dielectric strength of 1000 Vrms minimum at sea level. Operating temperature range spans -30°C to 85°C with an electrical life of 40,000 make-and-break cycles at full load. The vertical mounting configuration with 0.150" terminal pitch and PC mounting holes (0.073" DIA typical) makes it ideal for space-constrained panel applications in industrial control, instrumentation, and consumer electronics where reliable switching performance is required.
Zoekwoorden: 7103P4DAV2BE
SPECIFICATIES
VEELGESTELDE VRAGEN
Is 7103P4DAV2BE RoHS-conform?
Ja, 7103P4DAV2BE is RoHS-conform.
Wat is de levertijd voor 7103P4DAV2BE?
De standaard levertijd voor 7103P4DAV2BE is ongeveer 23 weken. Voorraadhoeveelheden worden verzonden vanuit Master Electronics.
OP VOORRAAD: 340
Kan direct verzenden
MOQ voor voorraadhoeveelheid: 5
MOQ voor niet-voorraadhoeveelheid: 20
Fabriekslevertijd 23 Weken
English
中文 / 汉语
Deutsch
Español
Nederlands
