KD1-0.25
Circuit Breaker - 1Pole - 0.25A - 250VAC - 2-Pin. ...
BESCHRIJVING
The KD1-0.25, KD1 series Pushbutton Circuit Protector provides circuit protection similar to a fuse. Both cut-off current flow in the event of overload current conditions. But unlike the fuse which must be replaced, simply pushing the Re-Click-It protector's reset button closes the circuit again once the electrical problem has been corrected. The KD1 circuit protector is available with either the standard round black cap or a rectangular cap. The rectangular cap can be supplied in any of seven standard colours (black, white, dark grey, red, orange, green or blue). The Re-Click-It protector trips delay upon short-circuit and with a controlled delay upon sustained overloads. Upon tripping, the contacts open with a positive snap action, thereby suppressing the arc. The KD1 trips only in response to overload current conditions.
Zoekwoorden: KD1025
SPECIFICATIES
VEELGESTELDE VRAGEN
Is KD1-0.25 RoHS-conform?
Nee, KD1-0.25 is niet RoHS-conform.
Wat is de levertijd voor KD1-0.25?
De standaard levertijd voor KD1-0.25 is ongeveer 4 dagen. Voorraadhoeveelheden worden verzonden vanuit Master Electronics.
OP VOORRAAD: 90
Kan direct verzenden
Minimale bestelhoeveelheid: 3
Fabriekslevertijd 4 Weken
Prijs (USD)
Productgidsen
English
中文 / 汉语
Deutsch
Español
Nederlands
