TC7662ACPA
DC/DC Adjustable Charge Pump Voltage Converter - 3V to 18V in - -18V to -3V/40 mA out - PDIP - 8 Pin. ...
BESCHRIJVING
The TC7662ACPA is a charge pump DC-to-DC Converter for process instrumentation. The TC7662A is a pin-compatible upgrade to the industry standard TC7660 charge pump voltage converter. It converts a +3 to +18V input to a corresponding -3 to -18V output using only two low cost capacitors, eliminating inductors and their associated cost, size and EMI. In addition to a wider power supply input range (3 to 18V versus 1.5 to 10V for the TC7660), the TC7662A can source output currents as high as 40mA. The on-board oscillator operates at a nominal frequency of 12kHz. Operation below 12kHz (for lower supply current applications) is also possible by connecting an external capacitor from OSC to ground.
Zoekwoorden: TC7662ACPA
SPECIFICATIES
VEELGESTELDE VRAGEN
Is TC7662ACPA RoHS-conform?
Ja, TC7662ACPA is RoHS-conform.
Wat is de levertijd voor TC7662ACPA?
De standaard levertijd voor TC7662ACPA is ongeveer 5 dagen. Voorraadhoeveelheden worden verzonden vanuit Master Electronics.
OP VOORRAAD: 1.203
Kan direct verzenden
Minimale bestelhoeveelheid: 60
Meerdere: 60
Fabriekslevertijd 5 Weken
English
中文 / 汉语
Deutsch
Español
Nederlands
