KD1-0.5
Thermal Circuit Breaker - KD Series - 500 mA - 1 Pole - 50 VDC - 250 VAC - Panel. ...
BESCHRIJVING
The KD1-.05A is a Pushbutton Circuit Protector provides circuit protection similar to a fuse but does not require replacement after a fault. This resettable design allows your customer to stay online and eliminate downtime. The KD series circuit breaker is easily installed in a 5/8-inch round or D-shaped panel cutout similar to that used on conventional panel mounted fuse holders. It can be mounted from either the front or rear and is held in place by special hardware. Its 1/4-inch quick-connect terminals are solderable. The KD pushbutton circuit protector trips without delay on short circuit and with a controlled delay upon sustained overloads upon tripping, the contacts open with a positive snap action, thereby suppressing the arc.
Zoekwoorden: KD105
SPECIFICATIES
VEELGESTELDE VRAGEN
Is KD1-0.5 RoHS-conform?
Nee, KD1-0.5 is niet RoHS-conform.
Wat is de levertijd voor KD1-0.5?
De standaard levertijd voor KD1-0.5 is ongeveer 4 dagen. Voorraadhoeveelheden worden verzonden vanuit Master Electronics.
OP VOORRAAD: 142
Kan direct verzenden
Minimale bestelhoeveelheid: 3
Fabriekslevertijd 4 Weken
Prijs (USD)
Productgidsen
English
中文 / 汉语
Deutsch
Español
Nederlands
