93PR2KLF
Res Cermet Trimmer 2K Ohm 10% 1W 1(Elec)/1(Mech)Turn 6.35mm (12.7 X 6.35mm) Pin Thru-Hole Box ...
BESCHRIJVING
The 93PR2KLF is a Model 93 single-turn cermet trimming potentiometer featuring a 1/2" diameter form factor with top adjustment capability. It offers a standard resistance range from 20 ohms to 2 megohms with ±10% tolerance (±20% for values below 100 ohms), and supports a maximum input voltage of 200 Vdc or rms with a power rating of 1.0 watts at 70°C. The device provides an actual electrical travel of 270° with essentially infinite resolution, a maximum end resistance of 2 ohms, and excellent insulation resistance of 1,000 megohms minimum. Operating over a temperature range of -55°C to +125°C with a temperature coefficient of ±100 ppm/°C, the potentiometer is sealed with 85°C Fluorinert and rated for 200 rotational cycles with robust mechanical stops of 24 oz.-in. This component is ideal for precision circuit trimming and calibration applications in instrumentation, test equipment, and industrial control systems where reliable adjustment and long-term stability are required.
Zoekwoorden: 93PR2KLF
SPECIFICATIES
VEELGESTELDE VRAGEN
Is 93PR2KLF RoHS-conform?
Ja, 93PR2KLF is RoHS-conform.
Wat is de levertijd voor 93PR2KLF?
De standaard levertijd voor 93PR2KLF is ongeveer 25 dagen. Voorraadhoeveelheden worden verzonden vanuit Master Electronics.
OP VOORRAAD: 281
Kan direct verzenden
Minimale bestelhoeveelheid: 41
Fabriekslevertijd 25 Weken
Prijs (USD)
Productgidsen
English
中文 / 汉语
Deutsch
Español
Nederlands
