DESCRIPCIÓN
459587-1 is a crimp tooling component used in wire termination processes to form electrical connections between wires and terminal barrels. The tooling operates based on precise dimensional control of crimp height (CH) and crimp width (CW) to achieve the target Area Index (AI), typically designed at 80% to ensure proper electrical and mechanical performance. Key dimensional parameters include nominal crimp height of 0.073 inches, crimp width of 0.110 inches, crimper leg taper of 3.0 degrees, and anvil width of 0.109 inches, with nominal anvil-to-crimper clearance of 0.005 inches. The tooling must maintain strict tolerances (±0.002 inches on crimp height) to prevent flash generation and ensure consistent termination quality across production runs. This component is critical for maintaining pull test values, crimp symmetry, and production throughput in high-volume wire termination and connector assembly operations.
Palabras clave de búsqueda: 4595871
ESPECIFICACIONES
PREGUNTAS FRECUENTES
¿Cumple 459587-1 con la normativa RoHS?
Sí, 459587-1 cumple con la normativa RoHS.
¿Cuál es el plazo de entrega de 459587-1?
El plazo de entrega estándar de 459587-1 es de aproximadamente 8 semanas. Las cantidades disponibles se envían desde Master Electronics.
EN STOCK: 6
Puede enviar inmediatamente
Stock del fabricante: 33 puede enviar 12/7/26
Plazo de entrega de fábrica 8 Semanas puede enviar 1/18/27
English
中文 / 汉语
Deutsch
Español
Nederlands
