DESCRIPCIÓN
SKU 458141-8 is a crimp tooling component used in electrical connector termination processes. The tooling is designed to achieve precise crimp height (CH) and crimp width (CW) control to maintain an Area Index (AI) of approximately 80%, which is critical for proper electrical and mechanical performance. Key dimensional parameters include a nominal crimp height of 0.073 inches and crimp width of 0.110 inches, with a crimper leg taper of 3.0 degrees and anvil width of 0.109 inches. The tooling requires strict dimensional control with tolerances of ±0.002 inches on crimp height to ensure consistent quality and minimize flash generation. This component is essential for high-volume wire and terminal crimping operations where maintaining process consistency and pull test values directly impacts production throughput and connector reliability.
Palabras clave de búsqueda: 4581418
ESPECIFICACIONES
PREGUNTAS FRECUENTES
¿Cumple 458141-8 con la normativa RoHS?
No, 458141-8 no cumple con la normativa RoHS.
¿Cuál es el plazo de entrega de 458141-8?
El plazo de entrega estándar de 458141-8 es de aproximadamente 7 semanas. Las cantidades disponibles se envían desde Master Electronics.
EN STOCK: 2
Puede enviar inmediatamente
Stock del fabricante: 1 puede enviar 12/7/26
Plazo de entrega de fábrica 7 Semanas puede enviar 1/11/27
English
中文 / 汉语
Deutsch
Español
Nederlands
