DESCRIPCIÓN
1633703-8 is a crimp tooling component used in wire termination and barrel forming processes for electrical connectors. The tooling is designed to achieve precise crimp height (CH) and crimp width (CW) control, with a typical design point for Area Index (AI) of 80%, where AI is calculated as the ratio of total crimped area to total uncrimped area expressed as a percentage. Critical dimensional specifications include a nominal crimp height of 0.073 inches, crimp width of 0.110 inches, crimper leg taper of 3.0 degrees, and anvil width of 0.109 inches, with a nominal anvil-to-crimper clearance of 0.005 inches. The tooling components must withstand high loads and moderate shock, with the wire crimper experiencing aggressive shear loading during the plastic deformation and extrusion process. This tooling is essential for maintaining consistent crimp quality in production termination processes, where dimensional control directly impacts pull test values, crimp symmetry, and overall connector reliability.
Palabras clave de búsqueda: 16337038
ESPECIFICACIONES
PREGUNTAS FRECUENTES
¿Cumple 1633703-8 con la normativa RoHS?
No, 1633703-8 no cumple con la normativa RoHS.
¿Cuál es el plazo de entrega de 1633703-8?
El plazo de entrega estándar de 1633703-8 es de aproximadamente 7 semanas. Las cantidades disponibles se envían desde Master Electronics.
EN STOCK: 5
Puede enviar inmediatamente
Plazo de entrega de fábrica 7 Semanas
English
中文 / 汉语
Deutsch
Español
Nederlands
