469366-2
PLATE, SHEAR REAR ...
DESCRIPCIÓN
The 469366-2 is a crimp tooling component designed for wire barrel termination in electrical connector assembly processes. The tooling is engineered to maintain precise crimp height (CH) and crimp width (CW) dimensions to achieve a target area index (AI) of approximately 80%, which is critical for ensuring proper electrical and mechanical connection quality. Key dimensional parameters include a nominal crimp height of 0.073 inches, crimp width of 0.110 inches, crimper leg taper of 3.0 degrees, and anvil width of 0.109 inches, with a nominal anvil-to-crimper clearance of 0.005 inches. The tooling components (wire crimper and anvil) are manufactured from materials selected to withstand high loads, moderate shock, and the shear loading generated during the plastic deformation and extrusion of the terminal barrel. This crimp tooling is used in production termination processes where dimensional control is critical to minimize flash generation, maintain consistent pull test values, and achieve high throughput with repeatable crimp quality across high-volume manufacturing operations.
Palabras clave de búsqueda: 4693662
ESPECIFICACIONES
PREGUNTAS FRECUENTES
¿Cumple 469366-2 con la normativa RoHS?
No, 469366-2 no cumple con la normativa RoHS.
¿Cuál es el plazo de entrega de 469366-2?
El plazo de entrega estándar de 469366-2 es de aproximadamente 18 semanas. Las cantidades disponibles se envían desde Master Electronics.
EN STOCK: 6
Envío today, Introduzca el valor de la configuración.
A la orden:
4
puede enviar 11/25/26
Plazo de entrega de fábrica 18 Semanas
English
中文 / 汉语
Deutsch
Español
Nederlands
