Iniciar sesión
ES
English
中文 / 汉语
Deutsch
Español
Nederlands
DESCRIPCIÓN
1633926-7 is a technical reference document for crimp tooling application in wire termination processes. It provides guidance on critical dimensional parameters including crimp height (CH), crimp width (CW), and area index (AI), with a typical design point of 80% AI. The document specifies nominal conditions such as CH of 0.073 in, CW of 0.110 in, crimper leg taper of 3.0 degrees, and anvil width of 0.109 in, with a nominal anvil-to-crimper clearance of 0.005 in. It emphasizes the importance of dimensional control, as small variations in CW (±2%) directly impact CH tolerance, and demonstrates how clearance can increase by more than 50% with cumulative dimensional changes. The material selection for wire crimpers and anvils is critical, as these components must withstand high loads, moderate shock, and shear loading during the plastic deformation and extrusion process.
Palabras clave de búsqueda: 16339267
ESPECIFICACIONES
PREGUNTAS FRECUENTES
¿Cumple 1633926-7 con la normativa RoHS?
No, 1633926-7 no cumple con la normativa RoHS.
¿Cuál es el plazo de entrega de 1633926-7?
El plazo de entrega estándar de 1633926-7 es de aproximadamente 9 semanas. Las cantidades disponibles se envían desde Master Electronics.
EN STOCK: 3
Puede enviar inmediatamente
Stock del fabricante: 1 puede enviar 11/2/26
Plazo de entrega de fábrica 9 Semanas puede enviar 12/22/26
Hoja de datos
Instruction Sheet - General Preventive Maintenance for Applicators