Iniciar sesión
ES
English
中文 / 汉语
Deutsch
Español
Nederlands
AQY410EHA
Solid State Relay 50mA 1.5V DC-IN 0.13A 350V AC/DC-OUT 4-Pin DIP SMD Tube ...
DESCRIPCIÓN
The AQY410EHA is a normally-closed PhotoMOS relay featuring reinforced insulation rated at 5,000 V AC with a Form B output configuration. It is designed for AC/DC dual-use applications with a maximum load voltage of 350 V and continuous load current of 130 mA, utilizing a built-in MOSFET processed by Panasonic's proprietary DSD (Double-diffused and Selective Doping) method to achieve low on-resistance of 18 O typical. The device operates over a temperature range of -40°C to +85°C with an I/O isolation voltage of 5,000 V AC, more than 0.4 mm internal insulation distance between inputs and outputs, and conforms to EN41003 and EN60950 standards for reinforced insulation. With a typical operate (OFF) time of 1.0 ms and reverse (ON) time of 0.3 ms, the relay can control low-level analog signals with extremely low closed-circuit offset voltage and minimal off-state leakage current of 10 µA maximum. Common applications include power supplies, measuring equipment, security systems, modems, telephone equipment, and sensing equipment where reliable isolation and low-distortion signal control are required.
Palabras clave de búsqueda: AQY410EHA
ESPECIFICACIONES
PREGUNTAS FRECUENTES
¿Cumple AQY410EHA con la normativa RoHS?
Sí, AQY410EHA cumple con la normativa RoHS.
¿Cuál es el plazo de entrega de AQY410EHA?
El plazo de entrega estándar de AQY410EHA es de aproximadamente 14 días. Las cantidades disponibles se envían desde Master Electronics.
EN STOCK: 200
Puede enviar inmediatamente
Cantidad mínima de pedido: 10
Plazo de entrega de fábrica 14 Semanas
Hoja de datos
Transportation guía