LAN9512I-JZX
Interface Bridges - USB to 10/100 Ethernet - 3 V - 3.6 V - QFN 64 Pins - -40 °C. ...
DESCRIPCIÓN
The LAN9512i is a high performance Hi-Speed USB 2.0 hub with a 10/100 Ethernet controller. With applications ranging from embedded systems, desktop PCs, notebook PCs, printers, game consoles, and docking stations, the LAN9512i is targeted as a high performance, low cost USB/Ethernet and USB/USB connectivity solution. Key Features USB Hub Fully compliant with Universal Serial Bus Specification Revision 2.0 HS (480 Mbps), FS (12 Mbps), and LS (1.5 Mbps) compatible Two downstream ports, one upstream port Port mapping and disable support Port Swap: Programmable USB diff-pair pin location PHY Boost: Programmable USB signal drive strength Select presence of a permanently hardwired USB peripheral device on a port by port basis Advanced power saving features Downstream PHY goes into low power mode when port power to the port is disabled Full Power Management with individual or ganged power control of each downstream port. Integrated USB termination Pull-up/Pull-down resistors Internal short circuit protection of USB differential signal pins
Palabras clave de búsqueda: LAN9512IJZX
ESPECIFICACIONES
PREGUNTAS FRECUENTES
¿Cumple LAN9512I-JZX con la normativa RoHS?
Sí, LAN9512I-JZX cumple con la normativa RoHS.
¿Cuál es el plazo de entrega de LAN9512I-JZX?
El plazo de entrega estándar de LAN9512I-JZX es de aproximadamente 30 días. Las cantidades disponibles se envían desde Master Electronics.
EN STOCK: 232
Puede enviar inmediatamente
A la orden:
260
puede enviar 9/23/26
Cantidad mínima de pedido: 5
Plazo de entrega de fábrica 30 Semanas
English
中文 / 汉语
Deutsch
Español
Nederlands
