help desk software
Alternative Packaging
MF-R075-2-99
MF-R075-2-99
En stock: 9.000
pedido mínimo: 3.000
VER PRODUCTO
Posible reemplazo
MF-R075
MF-R075
En stock: 8.585
pedido mínimo: 80
VER PRODUCTO
MF-R075-2 by bourns
Imagen de referencia - consulte las especificaciones del fabricante

MF-R075-2

Bourns

PTC Resettable Fuse 0.75A(hold) 1.5A(trip) 60V 40A 0.9W 6.3s 0.18Ohm Radial 10.4 X 3.1mm T/R Automotive ...

Cumple con RoHS
REEL embalaje
Accesorios
Solicitar Presupuesto de Programación
This product is backed by Master Electronics' Certificate of Compliance Guarantee. Rest assured you will receive the Manufacturer's Certificate of Compliance with your order. Garantía del certificado de conformidad

DESCRIPCIÓN

MF-R075-2 is a radial-leaded PTC resettable fuse from Bourns' MF-R Series designed for automatic circuit protection in low-voltage power supplies and general electronics. The device features a maximum voltage rating of 60 V and a maximum current rating of 40 A, with a hold current (Ihold) of 0.75 A and a trip current (Itrip) of 1.50 A at 23°C. It exhibits an initial resistance of 0.40 O and a post-trip resistance of 0.60 O maximum, with a maximum time to trip of 3.75 seconds and typical tripped power dissipation of 0.90 W. The device is constructed with cured, flame-retardant epoxy polymer insulation meeting UL 94V-0 requirements, is RoHS compliant, and halogen-free. MF-R075-2 is ideal for protecting computer peripherals, general electronics, and any application requiring automatic resettable overcurrent protection without manual intervention.

Palabras clave de búsqueda: MFR0752

ESPECIFICACIÓN

Atributo del producto
Valor del atributo
Seleccionar atributo
Productos Encontrados: 0
Proveedor:
Bourns
Nº de pieza:
MF-R075-2
Unidad de medida:
Por Each
RoHS:
Yes
HTS:
8533408050
COO:
CN
ECCN:
EAR99
Reel Pack: This product ships on a reel. Depending on the quantity ordered, you may receive full factory reels, cut tape (components on a strip cut from a reel), or a combination of both.
3000
Tipo de paquete:
REEL
Corriente de retención:
0.75 A
Corriente de disparo:
1.5 A
Corriente Nominal Máxima:
40 A
Tensión Máxima Nominal:
60 V
Tiempo de disparo máximo:
6.3@3.75A s
Resistencia inicial mínima:
0.18 Ohm
Resistencia inicial máxima:
0.4 Ohm
Encapsulado/Case:
N/A
Montaje:
Through Hole
Embalaje:
Tape and Reel
  Diferentes opciones de embalaje disponibles.  Ver Alternativas
  Posibles opciones de reemplazo disponibles.  Ver Alternativas

EN STOCK: 9.000

Puede enviar inmediatamente

Cantidad mínima de pedido: 3000

Múltiple: 3000

Plazo de entrega de fábrica 4 Semanas

Precio (USD)

Qty
Precio unitario
3.000
$0.1698
6.000
$0.1561
9.000
$0.1532
12.000
$0.1519
27.000
$0.1493
51.000 +
$0.1479