22AR1MEGLFTR by bi technologies/tt electronics
Imagen de referencia - consulte las especificaciones del fabricante

22AR1MEGLFTR

BI Technologies/TT Electronics

Res Cermet Trimmer 1M Ohm 20% 0.125W(1/8W) 1(Elec)/1(Mech)Turn 1.93mm (3.2 X 3.51 X 2.21mm) J-Hook SMD T/R ...

FICHA TÉCNICA
Cumple con RoHS
Reel embalaje
Accesorios
Solicitar Presupuesto de Programación
This product is backed by Master Electronics' Certificate of Compliance Guarantee. Rest assured you will receive the Manufacturer's Certificate of Compliance with your order. Garantía del certificado de conformidad

DESCRIPCIÓN

The 22AR1MEGLFTR is a Model 22 sealed single-turn surface-mount cermet trimming potentiometer designed for precision resistance adjustment in compact applications. It features a 3 mm square form factor with a resistance range of 10 Ohms to 2 Megohms, ±20% tolerance, and an essentially infinite resolution for fine tuning. The device is rated for 0.125 Watts at 70°C with a maximum input voltage of 200 Vdc (or rms), 500 Vrms dielectric strength, and 100 Megohms minimum insulation resistance. Operating over a wide temperature range of -55°C to +125°C with a temperature coefficient of ±100 ppm/°C (±150 ppm/°C for resistances below 100 Ohms), the potentiometer is sealed with 85°C Fluorinert for environmental protection and demonstrates excellent mechanical durability with 100 rotational cycles and 1,000 hours load life at rated conditions. This component is ideal for circuit calibration, signal conditioning, and precision measurement applications where space constraints and environmental sealing are critical requirements.

Palabras clave de búsqueda: 22AR1MEGLFTR

ESPECIFICACIÓN

Atributo del producto
Valor del atributo
Seleccionar atributo
Productos Encontrados: 0
Proveedor:
BI Technologies/TT Electronics
Nº de pieza:
22AR1MEGLFTR
Unidad de medida:
Por Each
RoHS:
Yes
HTS:
8533408050
COO:
TW
ECCN:
EAR99
Reel Pack: This product ships on a reel. Depending on the quantity ordered, you may receive full factory reels, cut tape (components on a strip cut from a reel), or a combination of both.
1000
Tipo de paquete:
Reel
Montaje:
Surface Mount
Número de vueltas:
1(Elec),1(Mech) Turns
Estilo de Terminación:
J-Hook
Potencia nominal:
0.125 (1/8) W
Valor de Resistencia:
1 MOhm
Tolerancia:
20 %
Coeficiente de Temperatura:
±100 ppm/°C
Dimensión:
3.2 x 3.51 x 2.21 mm
Temperatura de Funcionamiento:
-55 to 125 °C

EN STOCK: 2.497

Envío today, Si realiza un pedido en

MOQ para Cantidad en Stock: 25

MOQ para cantidad agotada: 500

Plazo de entrega de fábrica 83 Semanas

Precio (USD)

Qty
Precio unitario
25
$1.526
100
$1.473
250
$1.458
500
$1.451
1.000
$1.005
1.500
$1.000
2.000 +
$0.995
Reel Package
Log in for special pricing Haga clic para solicitar una cotización Price Match Request

Herramientas/Modelos 3D

Guías de productos