5787082-5
D Sub Connector - 50 Contacts - Receptacle - Through Hole - Amplimite 0.050 III Series - Steel Body. ...
描述
The 5787082-5 Amplimite 0.050 III series IDC D-sub Connectors offers a high-density D type interface and a solder-less board-mount interconnection. Choice of configurations includes headers with rails and latch blocks, with latch blocks only and without rails and latch blocks. It headers with ACTION PIN contacts are compatible with SCSI-2, SCSI-3, EIA RS-232, IPI-2 and HIPPI standards. The diameter of the hole is smaller than the diagonal size of the pin. The beam characteristics of the pin are designed so that a plastic, as well as elastic, deformation takes place during insertion. The two spring members compress to different degrees to accommodate hole tolerances. The compliant pin also reduces strain on the board. With a rigid pin, the elastic strain energy is stored entirely in the board, leading to damage of the plated through holes. The residual force of the elastic deformation maintains stored energy to produce a gas-tight contact zone between the pin and the plated-through-hole.
产品亮点:
- Connector
- Connector Type = Receptacle
- Number of Positions = 50
- PCB Mount Angle = Right Angle
- Through Hole Contact Termination Type
搜索关键词: 57870825
规格
常见问题
5787082-5 是否符合 RoHS 标准?
是的,5787082-5 符合 RoHS 标准。
5787082-5 的交货期是多少?
5787082-5 的标准交货期约为 15 周。有库存的数量由 Master Electronics 发货。
有存货: 908
可立即发货
最小订购数量: 10
此消息模板用于通知联盟会员某个订单已付款。当金额被扣款时,订单会获得已付款状态。: 10
工厂交货期 15 周
产品指南
English
中文 / 汉语
Deutsch
Español
Nederlands
