注册
CN
English
中文 / 汉语
Deutsch
Español
Nederlands
MCP7940N-I/SN
Battery-Backed I2C Real-Time Clock/Calendar - 64-byte SRAM - 1.8 to 5.5VDC - 12/24 hour - I2C - -40°C to +85°C - 8-lead SOIC ...
描述
The MCP7940N series of low-power Real-Time Clocks (RTC) uses digital timing compensation for an accurate clock/calendar, a programmable output control for versatility, and a power sense circuit that automatically switches to the backup supply. Using a low-cost 32.768 kHz crystal, it tracks time using several internal registers. For communication, the MCP7940N uses the I2C™ bus. The clock/calendar automatically adjusts for months with fewer than 31 days, including corrections for leap years. The clock operates in either the 24-hour or 12-hour format with an AM/PM indicator and settable alarm(s) to the second, minute, hour, day of the week, date or month. Using the programmable CLKOUT, frequencies of 32.768, 8.192 and 4.096 kHz and 1 Hz can be generated from the external crystal. The device is fully accessible through the serial interface while VCC is between 1.8V and 5.5V, but can operate down to 1.3V for timekeeping and SRAM retention only.
搜索关键词: MCP7940NISN
规格
常见问题
MCP7940N-I/SN 是否符合 RoHS 标准？
是的，MCP7940N-I/SN 符合 RoHS 标准。
MCP7940N-I/SN 的交货期是多少？
MCP7940N-I/SN 的标准交货期约为 6 天。有库存的数量由 Master Electronics 发货。
有存货: 200
可立即发货
制造商库存: 50,511 可以发货 9/21/26
已订购:
500
可以发货 9/23/26
最小订购数量: 100
此消息模板用于通知联盟会员某个订单已付款。当金额被扣款时，订单会获得已付款状态。: 100
工厂交货期 6 周 可以发货 10/19/26
价格 (USD)
工具/3D模型
产品指南
数据表
