help desk software
BZ-3YWT82 by honeywell
图片仅供参考 - 请查看制造商规格
Honeywell 授权经销商

BZ-3YWT82

MICRO SWITCH™ Premium Large Basic Switches: BZ Series, Single Pole Double Throw (SPDT), Split Contact Construction Allowing Two Isolated Circuits, 5 A 250 Vac, 48,3 mm [1.90 in] Sintered Roller Lever Actuator, Binding Head Combination Screw Termination with Integral Lock Washers, Mounting Holes will Accept Pins or Screws, UL, CSA ...

查看数据表
符合 RoHS
包装
附件
请求编程报价
合规证书

描述

A Snap Action Switch is a type of momentary contact micro switch which operates at rapid speed as it takes very little force or stimulus to operate. The BZ series standard basic switches are used for simple or precision on/off application needs. These are highly sensitive switches that respond to very small movements and can rapidly change from one contact position to the other. They are generally used in irrigation systems, semi-trailer trucks, timing devices, office equipment, tests instruments, medical and dental equipment's, HVAC equipment, manually operated devices, and valves.

BZ-3YWT82 Snap Action Switch comes with an elongated mounting hole for easier, more accurate mounting. This Honeywell switch offers choice of actuation, termination and operating characteristics.

产品亮点:

  • Low operating force and differential travel
  • Elongated mounting hole for easier, more accurate mounting
  • Maximum AC Voltage Rating: 250 V
  • Minimum over-travel: 3.96 mm
  • Current rating ranges from 15 A to 25 A
  • Choice of actuation, termination and operating characteristics
  • Agency approvals and standards from UL, CSA

潜在应用:

  • Irrigation systems
  • Semi-trailer trucks
  • Timing devices
  • Office equipment
  • Test instruments
  • Medical/dental equipment
  • HVAC equipment
  • Manually operated devices
  • Valves

搜索关键词: BZ3YWT82

规格

产品属性
属性值
选择属性
找到的产品: 0
供应商:
Honeywell
部件编号:
BZ-3YWT82
计量单位:
每 Each
RoHS:
Yes
HTS:
85365007
COO:
MX
ECCN:
EAR99
供应商标准包装: 此信息提供给偏好按制造商标准包装数量的倍数购买的客户。最小订购数量和要求的订购倍数会与我们的价格和库存信息一起显示。
1
安装方式:
Through Hole
极-位配置:
SPDT
开关配置:
N.O./N.C.
致动器材质/样式:
Roller Lever
触点额定电流 @ 电压:
5@250VAC A
最大动作差:
1.91 mm
操作力:
1.25 N
端接方式:
Screw
尺寸:
64.24 x 17.45 x 52.17 mm
本体方向:
Straight
IP等级:
N/A

常见问题

BZ-3YWT82 是否符合 RoHS 标准？

是的，BZ-3YWT82 符合 RoHS 标准。

BZ-3YWT82 的交货期是多少？

BZ-3YWT82 的标准交货期约为 12 天。有库存的数量由 Master Electronics 发货。

有存货: 197

可立即发货

工厂交货期 12 周

价格 (USD)

数量
单价
1
$53.98
5
$49.63
10
$45.43
25
$44.88
50
$44.77
100
$44.65
250 +
$44.54
登录以获取特别价格 点击询价 价格匹配请求

工具/3D模型

产品指南