help desk software
TISP4070J3BJR-S by bourns
图片仅供参考 - 请查看制造商规格
Bourns 授权经销商

TISP4070J3BJR-S

Thyristor Surge Protection Devices 58V 50A 2-Pin SMB T/R ...

查看数据表
符合 RoHS
REEL 包装
附件
请求编程报价
合规证书

描述

TISP4070J3BJR-S is a bidirectional thyristor overvoltage protector from Bourns designed to limit overvoltages on telecom lines and enable GR-1089-CORE compliance. The device features an ion-implanted breakdown region providing precise and stable voltage with low voltage overshoot under surge conditions. It has a repetitive peak off-state voltage (VDRM) of ±58 V and a breakover voltage V(BO) of ±70 V, allowing signal voltages up to VDRM without clipping while limiting higher voltages to the breakover level. The device switches into a low on-state condition when sufficient current flows due to overvoltage, diverting current away from the protected circuit, and automatically resets when current falls below the holding current level. With a high holding current of 150 mA and rated for multiple international surge wave shapes (GR-1089-CORE, IEC 61000-4-5, TIA-968-A, ITU-T standards), it is ideal for protecting data transmission lines with DC power feeding, rugged modems, and transformer center-tap grounding applications.

搜索关键词: TISP4070J3BJRS

规格

产品属性
属性值
选择属性
找到的产品: 0
供应商:
Bourns
部件编号:
TISP4070J3BJR-S
计量单位:
每 Each
RoHS:
Yes
HTS:
8541300040
COO:
GB
ECCN:
EAR99
卷盘包装: 此信息适用于希望按制造商标准包装数量的倍数购买的客户。最低订购数量和要求的订购倍数会与价格和库存信息一同显示。
3000
封装类型:
REEL
系列:
TISP4070J3
最大结到壳热阻:
N/A
尺寸:
4.57(Max) x 3.94(Max) x 2.2(Max) mm
关断状态电压最大上升率:
5000(Min) V/ us
最大转折电流:
600 mA
最大保持电流:
600 mA
最大峰值脉冲电流:
1000 A
方向类型:
Bi-Directional
最大结到环境热阻:
90 °C/W
最大转折电压:
70 V

常见问题

TISP4070J3BJR-S 是否符合 RoHS 标准？

是的，TISP4070J3BJR-S 符合 RoHS 标准。

TISP4070J3BJR-S 的交货期是多少？

TISP4070J3BJR-S 的标准交货期约为 12 天。有库存的数量由 Master Electronics 发货。

有存货: 15,784

可立即发货

最小订购数量: 500

工厂交货期 12 周

价格 (USD)

数量
单价
500
$0.5687
1,000
$0.5275
3,000
$0.4919
6,000
$0.4907
9,000
$0.4789
12,000
$0.4777
15,000
$0.4667
27,000 +
$0.4655
卷盘包装
登录以获取特别价格 点击询价 价格匹配请求

工具/3D模型

产品指南