93PR2KLF
Res Cermet Trimmer 2K Ohm 10% 1W 1(Elec)/1(Mech)Turn 6.35mm (12.7 X 6.35mm) Pin Thru-Hole Box ...
描述
The 93PR2KLF is a Model 93 single-turn cermet trimming potentiometer featuring a 1/2" diameter form factor with top adjustment capability. It offers a standard resistance range from 20 ohms to 2 megohms with ±10% tolerance (±20% for values below 100 ohms), and supports a maximum input voltage of 200 Vdc or rms with a power rating of 1.0 watts at 70°C. The device provides an actual electrical travel of 270° with essentially infinite resolution, a maximum end resistance of 2 ohms, and excellent insulation resistance of 1,000 megohms minimum. Operating over a temperature range of -55°C to +125°C with a temperature coefficient of ±100 ppm/°C, the potentiometer is sealed with 85°C Fluorinert and rated for 200 rotational cycles with robust mechanical stops of 24 oz.-in. This component is ideal for precision circuit trimming and calibration applications in instrumentation, test equipment, and industrial control systems where reliable adjustment and long-term stability are required.
搜索关键词: 93PR2KLF
规格
常见问题
93PR2KLF 是否符合 RoHS 标准?
是的,93PR2KLF 符合 RoHS 标准。
93PR2KLF 的交货期是多少?
93PR2KLF 的标准交货期约为 25 周。有库存的数量由 Master Electronics 发货。
有存货: 281
可立即发货
最小订购数量: 41
工厂交货期 25 周
价格 (USD)
产品指南
English
中文 / 汉语
Deutsch
Español
Nederlands
