Login
EN
English
中文 / 汉语
Español
LR8K4-G
Linear Voltage Regulator - Adjustable - 1.2V to 440V/20 mA out - TO-252AA-3. ...
DESCRIPTION
LR8 is a high voltage, low output current, adjustable linear regulator. It has a wide operating input voltage range of 13.2 - 450V. The output voltage can be adjusted from 1.20 - 440V provided that the input voltage is at least 12V greater than the output voltage. The output voltage can be adjusted by means of two external resistors R1 and R2 as shown in the typical application circuits. The LR8 regulates the voltage difference between VOUT and ADJ pins to a nominal value of 1.20V. The 1.20V is amplified by the external resistor ratio R1 and R2. An internal constant bias current of typically 10µA is connected to the ADJ pin. This increases VOUT by a constant voltage of 10µA times R2. The LR8 has current limiting and temperature limiting. The output current limit is typically 20mA and the minimum temperature limit is 125°C. An output short circuit current will therefore be limited to 20mA. When the junction temperature reaches its temperature limit, the output current and/or output voltage will decrease to keep the junction temperature from exceeding its temperature limit. For SMPS start-up circuit applications, the LR8 turns off when an external voltage greater than the output voltage of the LR8 is applied to VOUT of the LR8. To maintain stability, a bypass capacitor of 1.0µF or larger and a minimum DC output current of 500µA are required. The device is available in TO-243AA (SOT-89), TO-252 (D-PAK), and TO-92 packages.
Search Keywords: LR8K4G
SPECIFICATIONS
IN STOCK: 62
Can Ship immediately
Buy all 62 in-stock or the regular minimum order quantity of 250
On Order:
2,000
can ship 9/2/26
Stock lot only: 62
Minimum Order Quantity: 250
Factory Lead-Time 8 Weeks
Price (USD)
Tools/3D Models
Product Guides
Datasheet
