TAP600 SERIES características:

• Rigidez Dieléctrica de hasta 12KV
• Special Design for Low Inductance and Capacitance Values
• Contacts allow for easy load connection with M5 screws (not included) available with M4 as special request. Thread depth 7mm
• Encapsulated with a special resin filled epoxy casing with a large creepage distance to mass, large air distance between terminals, and a high insulation resistance (CTI 600).
• Materials meet the requirements of UL94-V0

TAP650 AND TAP 800 SERIES características:

• TAP650 Series power rating: 650W at 85°C bottom case temp.
• TAP850 Seriespower rating: 800W at 85°C bottom case temp.
• For variable speed drives, power supplies, control devices, robotics, motor control and other power designs.
  
• High-purity ceramic metalized with film on bottom for better heat transfer and optimum discharge.
  
• Encapsulation: Special resin-filled epoxy casing. High insulation resistance (CTI 600), high dielectric strength and partial discharge capability.
  
• Elemento resistivo: diseño especial para bajos valores de inductancia y capacitancia. El elemento demuestra estabilidad mientras soporta alta potencia y carga por pulsos.